Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Start by loosening the strings. This is done by turning the tuning knob until the string has lost tension.
-
Repeat this for all six strings on the guitar.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
It may be necessary to use pliers to remove string ends from the tuning peg.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
After removing the strings from the tuning pegs, slide the strings through the bridge and out of the back of the guitar.
-
If the twists in the string ends are in the way, use wire cutters to snip them off. This will allow the heavier strings to pass through the bridge easier.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.