Saltar al contenido principal

Fast Fix Screen Replacement

Qué necesitas

  1. Fast Fix Screen Replacement, Screen: paso 1, imagen 1 de 3 Fast Fix Screen Replacement, Screen: paso 1, imagen 2 de 3 Fast Fix Screen Replacement, Screen: paso 1, imagen 3 de 3
    • Slide both battery latches to release cover.

    • Remove battery.

  2. Fast Fix Screen Replacement: paso 2, imagen 1 de 2 Fast Fix Screen Replacement: paso 2, imagen 2 de 2
    • Remove the M2.5 X 5mm phillips screw for the CD drive.

    • Remove the CD drive.

  3. Fast Fix Screen Replacement: paso 3, imagen 1 de 2 Fast Fix Screen Replacement: paso 3, imagen 2 de 2
    • Loosen 2 screws on access door.

    • They cannot be removed

    • Remove the access door.

  4. Fast Fix Screen Replacement: paso 4, imagen 1 de 1
    • Remove 12 M2.5 X 5MM Phillips bottom palm rest screws.

  5. Fast Fix Screen Replacement: paso 5, imagen 1 de 3 Fast Fix Screen Replacement: paso 5, imagen 2 de 3 Fast Fix Screen Replacement: paso 5, imagen 3 de 3
    • Use a small screwdriver to press in the keyboard latches.

    • Remove the keyboard.

    • Unplug the keyboard cable at the ZIF connection.

    The Zif Connector has to be opened before taking the cable out

    this applies to any Zif connector

    Tech, Tunes And Textures - Contestar

  6. Fast Fix Screen Replacement: paso 6, imagen 1 de 3 Fast Fix Screen Replacement: paso 6, imagen 2 de 3 Fast Fix Screen Replacement: paso 6, imagen 3 de 3
    • Remove the palm-rest cable by releasing the ZIF latch and pulling the wire out.

    • Remove 5 M2.5 X 5mm Phillips and 2 M2 X 3mm Phillips palm-rest screws.

  7. Fast Fix Screen Replacement: paso 7, imagen 1 de 1
    • Use a small flat screwdriver to pry the palm-rest off of the computer.

  8. Fast Fix Screen Replacement: paso 8, imagen 1 de 3 Fast Fix Screen Replacement: paso 8, imagen 2 de 3 Fast Fix Screen Replacement: paso 8, imagen 3 de 3
    • Remove the wireless antenna

    • Remove the LCD cable

  9. Fast Fix Screen Replacement: paso 9, imagen 1 de 1
    • Remove the 1 M2.5 x 5mm Phillips left hinge screw and 2 M2.5 x 5mm Phillips right hinge screw.

  10. Fast Fix Screen Replacement: paso 10, imagen 1 de 1
    • Pry off the LCD bevel using a small flat screwdriver.

  11. Fast Fix Screen Replacement: paso 11, imagen 1 de 1
    • Remove the 4 M2 X 3mm Philips LCD screws.

  12. Fast Fix Screen Replacement: paso 12, imagen 1 de 2 Fast Fix Screen Replacement: paso 12, imagen 2 de 2
    • Unplug the screen cable and remove the screen.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Carl Kangas

Miembro Desde 10/01/17

182 Reputación

1 Guía escrita

Equipo

Un comentario

Hello good day, I have a question, I have managed to replace the screen and the computer started the first time without problems, but after I started it again the computer did not turn on the screen again, will you have any possible solution?

vikingo1ero - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 3

Ultimos 30 días: 27

Todo El Tiempo: 2,893