Saltar al contenido principal

Fairphone 1 Wi-Fi Antenna Daughterboard Replacement

Qué necesitas

  1. Fairphone 1 Wi-Fi Antenna Daughterboard Replacement, Back Cover: paso 1, imagen 1 de 3 Fairphone 1 Wi-Fi Antenna Daughterboard Replacement, Back Cover: paso 1, imagen 2 de 3 Fairphone 1 Wi-Fi Antenna Daughterboard Replacement, Back Cover: paso 1, imagen 3 de 3
    • There is a small indentation in the side of the phone near the bottom of the back cover.

    • With the indentation as leverage, use your fingernail to pry the bottom portion of the back cover from the phone.

  2. Fairphone 1 Wi-Fi Antenna Daughterboard Replacement: paso 2, imagen 1 de 3 Fairphone 1 Wi-Fi Antenna Daughterboard Replacement: paso 2, imagen 2 de 3 Fairphone 1 Wi-Fi Antenna Daughterboard Replacement: paso 2, imagen 3 de 3
    • Slide the back cover down and remove it from the phone.

  3. Fairphone 1 Wi-Fi Antenna Daughterboard Replacement, Battery: paso 3, imagen 1 de 3 Fairphone 1 Wi-Fi Antenna Daughterboard Replacement, Battery: paso 3, imagen 2 de 3 Fairphone 1 Wi-Fi Antenna Daughterboard Replacement, Battery: paso 3, imagen 3 de 3
    • There is a small indentation in the back of the phone just below the battery.

    • Use a fingernail in this indentation to push the battery toward the top of the phone

    • Pull the battery out away from the phone.

  4. Fairphone 1 Wi-Fi Antenna Daughterboard Replacement: paso 4, imagen 1 de 1
    • Remove the battery from your Fairphone.

  5. Fairphone 1 Wi-Fi Antenna Daughterboard Replacement, SIM and MicroSD Card: paso 5, imagen 1 de 3 Fairphone 1 Wi-Fi Antenna Daughterboard Replacement, SIM and MicroSD Card: paso 5, imagen 2 de 3 Fairphone 1 Wi-Fi Antenna Daughterboard Replacement, SIM and MicroSD Card: paso 5, imagen 3 de 3
    • Use your finger to slide the SIM card straight down out of its tray.

    • Remove the SIM card from your Fairphone.

    • Repeat this procedure if you have a second SIM card.

    • Be sure to remove all SIM cards before servicing your phone.

  6. Fairphone 1 Wi-Fi Antenna Daughterboard Replacement: paso 6, imagen 1 de 2 Fairphone 1 Wi-Fi Antenna Daughterboard Replacement: paso 6, imagen 2 de 2
    • If you have a microSD card, use your finger to slide it straight out of its slot.

    • Remove the microSD card from your phone.

  7. Fairphone 1 Wi-Fi Antenna Daughterboard Replacement, Midframe Assembly: paso 7, imagen 1 de 1
    • Remove the five 3.9 mm Phillips #000 screws securing the midframe to the display assembly.

  8. Fairphone 1 Wi-Fi Antenna Daughterboard Replacement: paso 8, imagen 1 de 3 Fairphone 1 Wi-Fi Antenna Daughterboard Replacement: paso 8, imagen 2 de 3 Fairphone 1 Wi-Fi Antenna Daughterboard Replacement: paso 8, imagen 3 de 3
    • The midframe is secured to the display assembly by several small plastic clips.

    • Use an opening pick to carefully pry the midframe away from the display assembly.

    • Start just below the volume rocker and work your way down toward the bottom of the phone, freeing the plastic clips along the side.

  9. Fairphone 1 Wi-Fi Antenna Daughterboard Replacement: paso 9, imagen 1 de 2 Fairphone 1 Wi-Fi Antenna Daughterboard Replacement: paso 9, imagen 2 de 2
    • Carefully round the corner, separating the midframe from the display assembly.

  10. Fairphone 1 Wi-Fi Antenna Daughterboard Replacement: paso 10, imagen 1 de 1
    • After rounding the next corner, the midframe should be free along the bottom and the sides.

  11. Fairphone 1 Wi-Fi Antenna Daughterboard Replacement: paso 11, imagen 1 de 3 Fairphone 1 Wi-Fi Antenna Daughterboard Replacement: paso 11, imagen 2 de 3 Fairphone 1 Wi-Fi Antenna Daughterboard Replacement: paso 11, imagen 3 de 3
    • Run the opening pick and pry along the top seam.

    • To avoid bending or damaging the opening picks, do not pry near to the power switch, USB port, or headphone jack.

  12. Fairphone 1 Wi-Fi Antenna Daughterboard Replacement: paso 12, imagen 1 de 1
    • Separate any remaining clips and remove the midframe from the phone.

  13. Fairphone 1 Wi-Fi Antenna Daughterboard Replacement, Wi-Fi Antenna Daughterboard: paso 13, imagen 1 de 1
    • Use the flat end of a spudger to disconnect the antenna cable connector.

    • Be careful to pry on the connector, not the socket.

  14. Fairphone 1 Wi-Fi Antenna Daughterboard Replacement: paso 14, imagen 1 de 3 Fairphone 1 Wi-Fi Antenna Daughterboard Replacement: paso 14, imagen 2 de 3 Fairphone 1 Wi-Fi Antenna Daughterboard Replacement: paso 14, imagen 3 de 3
    • Use the tip of a spudger to flip open the tab on the daughterboard data cable ZIF connector.

    • Use tweezers to pull the daughterboard data cable away from its socket.

  15. Fairphone 1 Wi-Fi Antenna Daughterboard Replacement: paso 15, imagen 1 de 1
    • Remove the following screws securing the Wi-Fi daughterboard to the display assembly:

    • Two 2.5 mm Phillips #000 screws

    • One 1.6 mm Phillips #000 screw

  16. Fairphone 1 Wi-Fi Antenna Daughterboard Replacement: paso 16, imagen 1 de 2 Fairphone 1 Wi-Fi Antenna Daughterboard Replacement: paso 16, imagen 2 de 2
    • The Wi-Fi antenna daughterboard is held to the front assembly by mild adhesive.

    • Use tweezers to gently pry the board up and remove it from the phone.

Conclusión

To reassemble your device, follow these instructions in reverse order.

9 personas más completaron esta guía.

Equipo

iFixit Miembro de iFixit

Staff

135 Miembros

16,077 Guías creadas

Un comentario

I would suggest to rename the guide to "Fairphone Wi-Fi Antenna and Microphone Daughterboard Replacement", because it is also what you need to do to replace a broken fairphone microphone.

Torsten - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 4

Todo El Tiempo: 11,998