Saltar al contenido principal

Introducción

Does the remote control to your FAO Schwarz have a dead or corroded battery? This guide will show you how to replace your remote control battery in just four easy steps, with no additional tools needed. Your remote control should be working in no time!

Herramientas

Partes

No se especificaron partes.

  1. Remove the plastic battery cover to get at the battery compartment.
    • Remove the plastic battery cover to get at the battery compartment.

    • The cover can be removed by pressing down on the lever and sliding.

  2. Remove the dead battery, being careful not to damage the internal battery connectors. The battery is a bit wedged in there, so you'll have to press hard to pop it out. The battery is a bit wedged in there, so you'll have to press hard to pop it out.
    • Remove the dead battery, being careful not to damage the internal battery connectors.

    • The battery is a bit wedged in there, so you'll have to press hard to pop it out.

  3. Insert the new 6F22 9 volt battery. Line up the positive icons on the battery with the positive icons in the battery compartment. Line up the positive icons on the battery with the positive icons in the battery compartment.
    • Insert the new 6F22 9 volt battery.

    • Line up the positive icons on the battery with the positive icons in the battery compartment.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 1

Últimos 30 Días: 1

Todo El Tiempo: 68