Saltar al contenido principal

Introducción

Some vital parts of the vacuum cleaner require you to remove the casing in order to replace them. This guide serves as a prerequisite only to the guides on how to replace those parts.

  1. Unscrew the two 18.1 mm PH2 Phillips head screws on the bottom of the vacuum.
    • Unscrew the two 18.1 mm PH2 Phillips head screws on the bottom of the vacuum.

  2. Pry off the Riser Visor using the plastic opening tool.
    • Pry off the Riser Visor using the plastic opening tool.

  3. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  4. Remove the screw cap using the metal spudger.
    • Remove the screw cap using the metal spudger.

    • First-time removal of the screw cap can be difficult. The screw cap isn’t vital, so don’t worry about damaging the screw cap and just keep trying until it comes out.

  5. Unscrew the 14mm PH2 Phillips head screw. Pull the bottom cover off of the rest of the casing.
    • Unscrew the 14mm PH2 Phillips head screw.

    • Pull the bottom cover off of the rest of the casing.

  6. Pull the power switch all the way up and remove the dust cup.
    • Pull the power switch all the way up and remove the dust cup.

  7. Unscrew the six 18.1mm PH2 Phillips head screws on the side of the vacuum. Pull the casing apart.
    • Unscrew the six 18.1mm PH2 Phillips head screws on the side of the vacuum.

    • Pull the casing apart.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Tanner Durnil

Miembro Desde 06/11/17

637 Reputación

6 Guías creadas

Equipo

IUPUI, Team S6-G4, Baechle Fall 2017 Miembro de IUPUI, Team S6-G4, Baechle Fall 2017

IUPUI-BAECHLE-F17S6G4

3 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 58