Saltar al contenido principal

Introducción

This guide serves as a prerequisite only. The steps covered in this guide are used in all the replacement guides.

  1. Unscrew the two 18.1 mm PH2 Phillips head screws on the bottom of the vacuum.
    • Unscrew the two 18.1 mm PH2 Phillips head screws on the bottom of the vacuum.

  2. Pry off the Riser Visor using the plastic opening tool.
    • Pry off the Riser Visor using the plastic opening tool.

  3. Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora

    Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora
  4. Remove the screw cap using the metal spudger.
    • Remove the screw cap using the metal spudger.

    • First-time removal of the screw cap can be difficult. The screw cap isn’t vital, so don’t worry about damaging the screw cap and just keep trying until it comes out.

  5. Unscrew the 14mm PH2 Phillips head screw. Pull the bottom cover off of the rest of the casing.
    • Unscrew the 14mm PH2 Phillips head screw.

    • Pull the bottom cover off of the rest of the casing.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Tanner Durnil

Miembro Desde 06/11/17

637 Reputación

6 Guías creadas

Equipo

IUPUI, Team S6-G4, Baechle Fall 2017 Miembro de IUPUI, Team S6-G4, Baechle Fall 2017

IUPUI-BAECHLE-F17S6G4

3 Miembros

6 Guías creadas

Añadir comentario

Ver Estadísticas:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

Global: 84