Repara tus cosas Comunidad Tienda

Eureka AirSpeed Bagless Zuum Vacuum Wash Screen Replacement

Introducción

If you determine that your vacuum is no longer picking up debris, this guide will help you to replace the wash screen to increase the suction.

  1. Eureka AirSpeed Bagless Zuum Vacuum Wash Screen Replacement, Wash Screen: paso 1, imagen 1 de 2 Eureka AirSpeed Bagless Zuum Vacuum Wash Screen Replacement, Wash Screen: paso 1, imagen 2 de 2

    • Press the grey dust cup release button and gently pull the dust cup towards you.

    Editar

  2. Eureka AirSpeed Bagless Zuum Vacuum Wash Screen Replacement: paso 2, imagen 1 de 2 Eureka AirSpeed Bagless Zuum Vacuum Wash Screen Replacement: paso 2, imagen 2 de 2

    • Twist the large, black portion of the cyclone/dust cup to the right to unlock the black cyclone from the clear dust cup.

    Editar

  4. Eureka AirSpeed Bagless Zuum Vacuum Wash Screen Replacement: paso 3, imagen 1 de 2 Eureka AirSpeed Bagless Zuum Vacuum Wash Screen Replacement: paso 3, imagen 2 de 2

    • Twist the clear collar to release the wash screen and small circular collar.

    Editar

  5. Eureka AirSpeed Bagless Zuum Vacuum Wash Screen Replacement: paso 4, imagen 1 de 1

    • If screen is beyond washing clean or is cracked, connect new screen to cyclone and collar.

    Editar

    Where can I order a new collar for

    my 2012 Eureka vacuum? Thank you

    gallo.41 - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 4 otros colaboradores

Celina Burchett

Miembro Desde 10/13/14

1,122 Reputación

8 Guías creadas

Insignias: 13

+ 10 más insignias

Equipo

Clemson, Team 2-2, Benson Fall 2014 Miembro de Clemson, Team 2-2, Benson Fall 2014

CLEM-BENSON-F14S2G2

4 Miembros

18 Guías creadas

4 comentarios

Where do i purchase this replacement part? I can't find it anywhere.

jane pultz - Contestar

reattaching the collar to the wash screen is NOT EASY! I am not able to do it. What is the trick here??

ramsgusom - Contestar

Nvm. Just had to use my brain. there is a small groove in the plastic cylinder of the vacuum cleaner - the screen has to go below this - so that the collar can slide into the groove.

ramsgusom -

I wish there was a video on how to reattch the collar to the wash screen

Mike Adkins - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 17

Todo El Tiempo: 1,872