Saltar al contenido principal

Introducción

If you determine there is no suction at the end of the hose, this guide will help you to replace a damaged hose.

  1. On the back of the vacuum, pull the handle connected to the hose away from the vacuum. On the back of the vacuum, pull the handle connected to the hose away from the vacuum.
    • On the back of the vacuum, pull the handle connected to the hose away from the vacuum.

  2. Grasp the thick smooth collar at the bottom of the hose and twist left (counterclockwise) to remove the hose. Grasp the thick smooth collar at the bottom of the hose and twist left (counterclockwise) to remove the hose.
    • Grasp the thick smooth collar at the bottom of the hose and twist left (counterclockwise) to remove the hose.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Celina Burchett

Miembro Desde 13/10/14

1,101 Reputación

8 Guías creadas

Equipo

Clemson, Team 2-2, Benson Fall 2014 Miembro de Clemson, Team 2-2, Benson Fall 2014

CLEM-BENSON-F14S2G2

4 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 2

Últimos 7 Días: 3

Últimos 30 Días: 10

Todo El Tiempo: 1,336