Saltar al contenido principal

Introducción

If you determine that your vacuum brush roll will not turn and produces a burning smell, this guide will help you to replace the brush roll.

Partes

No se especificaron partes.

  1. Step on the grey release button located between the two back wheels to lower the handle flat to the floor. Insure the vacuum is unplugged before starting the process of removing the brush roll.
    • Step on the grey release button located between the two back wheels to lower the handle flat to the floor.

    • Insure the vacuum is unplugged before starting the process of removing the brush roll.

  2. Using a Phillips #2 screwdriver, remove the four screws from each corner of the brush roll cover.
    • Using a Phillips #2 screwdriver, remove the four screws from each corner of the brush roll cover.

  3. Kits de Reparación de Android

    A new screen or battery is one kit away.

    Comprar Ahora

    Kits de Reparación de Android

    A new screen or battery is one kit away.

    Comprar Ahora
  4. Remove the brush cover from the vacuum base, by pulling straight up. Remove the brush cover from the vacuum base, by pulling straight up.
    • Remove the brush cover from the vacuum base, by pulling straight up.

  5. Firmly press upwards from below the brush roll on the side opposite the belt.
    • Firmly press upwards from below the brush roll on the side opposite the belt.

  6. After one end is displaced, remove the other side by pressing firmly upwards from below the the brush roll.
    • After one end is displaced, remove the other side by pressing firmly upwards from below the the brush roll.

  7. Once the brush roll is displaced from the base, detach the belt from the brush roll in order to clean the brush roll.
    • Once the brush roll is displaced from the base, detach the belt from the brush roll in order to clean the brush roll.

Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

Celina Burchett

Miembro Desde 13/10/14

1,101 Reputación

8 Guías creadas

Equipo

Clemson, Team 2-2, Benson Fall 2014 Miembro de Clemson, Team 2-2, Benson Fall 2014

CLEM-BENSON-F14S2G2

4 Miembros

8 Guías creadas

Brush roll replacement is a no brainer. It is the brush roll assembly that turns the brush that I need to fix. Cannot determine what tool to use as it doesn't come off using a regular screwdriver and eureka won't tell me what to ese.

Tami Jones - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 3

Últimos 7 Días: 26

Últimos 30 Días: 85

Todo El Tiempo: 8,489