Repara tus cosas Comunidad Tienda

Eufy RoboVac 11S Drive Wheels Replacement

Introducción

If your RoboVac 11s is having trouble moving around, the issue may come from the drive wheels. This guide will walk you through replacing the wheels and getting your machine working again.

Qué necesitas

  1. Eufy RoboVac 11S Drive Wheels Replacement, Drive Wheels: paso 1, imagen 1 de 1

    • Turn off the RoboVac's power and flip it over onto a soft surface.

    Traducir

  2. Eufy RoboVac 11S Drive Wheels Replacement: paso 2, imagen 1 de 1

    • Remove the side brushes by pulling them off.

    Traducir

  4. Eufy RoboVac 11S Drive Wheels Replacement: paso 3, imagen 1 de 1

    • Use the Phillips screwdriver to remove the four 5 mm screws in front of the wheel being replaced.

    Traducir

  5. Eufy RoboVac 11S Drive Wheels Replacement: paso 4, imagen 1 de 1

    • Lift the wheel slightly and disconnect the spring and cable connected to it.

    • Wiggle the cable gently to detach it.

    Traducir

  6. Eufy RoboVac 11S Drive Wheels Replacement: paso 5, imagen 1 de 1

    • Fully remove the old wheel.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 8

Ultimos 30 días: 25

Todo El Tiempo: 189