Repara tus cosas Comunidad Tienda

Eufy RoboVac 11S Bumper Replacement

Introducción

The front bumper of the RoboVac 11s is used to sense obstacles in its path. A malfunctioning front bumper can cause the Robovac to move in a circular motion. Use this guide to remove or replace the front bumper on your RoboVac 11s.

Qué necesitas

  1. Eufy RoboVac 11S Bumper Replacement, Bumper: paso 1, imagen 1 de 1

    • Turn off the RoboVac's power and flip it over onto a soft surface.

    Editar

  2. Eufy RoboVac 11S Bumper Replacement: paso 2, imagen 1 de 2 Eufy RoboVac 11S Bumper Replacement: paso 2, imagen 2 de 2

    • Using the Phillips screwdriver, remove the eight 5 mm Phillips screws from the top of the bumper.

    • 4 screws on each long edge.

    Editar

  4. Eufy RoboVac 11S Bumper Replacement: paso 3, imagen 1 de 1

    • Lift the bumper slightly and locate the cable connecting it to the main body. Unplug this cable.

    Editar

  5. Eufy RoboVac 11S Bumper Replacement: paso 4, imagen 1 de 1

    • Wiggle the bumper gently to detach it completely.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 7

Ultimos 30 días: 36

Todo El Tiempo: 187