Saltar al contenido principal

Introducción

Is the sound being produced by the radar staticky or no sound is being produced at all? If so, follow these steps to replace your radar's speakers.

Partes

No se especificaron partes.

  1. Remove the three 1.2 mm Phillips #1 screws on the back of the device.
    • Remove the three 1.2 mm Phillips #1 screws on the back of the device.

  2. Pry off the back panel of the radar using the nylon spudger.
    • Pry off the back panel of the radar using the nylon spudger.

  3. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  4. Carefully unplug the speaker wire from the motherboard. Carefully unplug the speaker wire from the motherboard.
    • Carefully unplug the speaker wire from the motherboard.

  5. Pull the speaker holder out of the motherboard.
    • Pull the speaker holder out of the motherboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Kennedy Morales

Miembro Desde 20/10/17

626 Reputación

6 Guías creadas

Equipo

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 8

Últimos 30 Días: 25

Todo El Tiempo: 215