Introducción

Replacing your ink cartridges.

When you are low on ink your green power light will be flashing and your error light will stay a solid red.
  • When you are low on ink your green power light will be flashing and your error light will stay a solid red.

Agregar Comentario

Lift the printer window open by pulling up on the tab.
  • Lift the printer window open by pulling up on the tab.

  • Your printer should now be in the same state as shown in the second picture.

Agregar Comentario

  • Press the button on the far right to get your ink cartridge holders to slide over. (See the second picture)

Agregar Comentario

  • Press the tabs with the upward facing arrows to open the hatches as shown in the first picture.

  • Remove the ink cartridge(s) that needs to be replaced. The black cartridge is on the left and the color cartridge is on the right.

  • Make sure your cartridges are the same as the ones shown in the third picture. Non-Epson ink cartridges may not be recognized by your printer.

Agregar Comentario

  • Insert your new ink cartridges and close the hatches.

  • Close your printer door and push the ink cartridge button on the far right and again.

  • After your ink charges you're ready to print!

Agregar Comentario

Linea de Meta

Una persona más ha completado esta guía.

Alex Lin

Miembro Desde 10/04/11

78 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 20-68, Walters Spring 2011 Miembro de Cal Poly, Team 20-68, Walters Spring 2011

CPSU-WALTERS-S11S20G68

4 Miembros

6 Guías creadas

I pushed the 3rd button so the cartridge holder will slide over, it will not move.

I tried unplugging the printer and plugging it back in & repower it up. still 'stuck' to the right.

I need to change the black ink. can you help? thank you!

tina - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 5

Todo El Tiempo: 2,449