Repara tus cosas Comunidad Tienda

Envizen V100M Speakers Replacement

Qué necesitas

  1. Envizen V100M Speakers Replacement, Back Cover: paso 1, imagen 1 de 2 Envizen V100M Speakers Replacement, Back Cover: paso 1, imagen 2 de 2

    • Remove the two screws on the side of the tablet that hold the back cover in place using the ifixit PH00 screwdriver.

    • The two screws for the back cover are: 1.5mm diameter x 3.5mm long

    Traducir

  2. Envizen V100M Speakers Replacement: paso 2, imagen 1 de 3 Envizen V100M Speakers Replacement: paso 2, imagen 2 de 3 Envizen V100M Speakers Replacement: paso 2, imagen 3 de 3

    • Pry along the edge of the device to separate the back cover from the device.

    • The speakers are attached to the back cover and motherboard assembly so remove carefully.

    Traducir

  4. Envizen V100M Speakers Replacement, Speakers: paso 3, imagen 1 de 1

    • Check to see if the wires of the speakers are connected to the motherboard assembly here.

    Traducir

  5. Envizen V100M Speakers Replacement: paso 4, imagen 1 de 1

    • take the wires of one of the speakers and solder them back on the mother board, as shown. Remember, Red is always positive (+) and Black is always negative (-). here is a guide on how to solder.

    Traducir

  6. Envizen V100M Speakers Replacement: paso 5, imagen 1 de 1

    • Repeat the same process for the second speaker. The other set of terminals for the second speaker is directly next to the first set.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

nbach

Miembro Desde 03/23/15

663 Reputación

6 Guías creadas

Insignias: 11

+ 8 más insignias

Equipo

UMass Dartmouth, Team 3-2, Duarte Spring 2015 Miembro de UMass Dartmouth, Team 3-2, Duarte Spring 2015

UMASSD-DUARTE-S15S3G2

4 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 97