Saltar al contenido principal

Herramientas

Partes

No se especificaron partes.

  1. Remove 2 Phillips screws holding the plastic engine shroud. Pull the cover up and off the engine. Remove 3 bolts with a 5/16 socket, then pull the plastic cover off the engine Remove 3 bolts with a 5/16 socket, then pull the plastic cover off the engine
    • Remove 2 Phillips screws holding the plastic engine shroud. Pull the cover up and off the engine.

    • Remove 3 bolts with a 5/16 socket, then pull the plastic cover off the engine

Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 64