Ematic eGlide 4 Wi-Fi Adaptor Replacement - Guía de reparación iFixit

Introducción

The Wi-Fi adaptor is a small antenna inside the tablet that allows the device to connect to wireless internet. The adaptor features its own circuit board, which will be necessary to exchange the part. The circuit board will be desoldered from the motherboard and the antenna will be removed from the front case.

Qué necesitas

Paso 1 Rear Panel

Ematic eGlide 4 Wi-Fi Adaptor Replacement, Rear Panel: paso 1, imagen 1 de 1

Remove the 4.6mm Phillips #00 screw at the base of the device.

Paso 2

Ematic eGlide 4 Wi-Fi Adaptor Replacement: paso 2, imagen 1 de 1

Slide the rear panel away from the base parallel to the screen.

Paso 3

Ematic eGlide 4 Wi-Fi Adaptor Replacement: paso 3, imagen 1 de 2

Ematic eGlide 4 Wi-Fi Adaptor Replacement: paso 3, imagen 2 de 2

Carefully remove the speakers from the rear panel.
Pull the speakers off of the rear panel.

Paso 4 Wi-Fi Adaptor

Ematic eGlide 4 Wi-Fi Adaptor Replacement, Wi-Fi Adaptor: paso 4, imagen 1 de 1

Desolder the Wi-Fi Adaptor
See ifixit's guide to soldering and desoldering for help: How to Solder and Desolder Connections

Paso 5

Ematic eGlide 4 Wi-Fi Adaptor Replacement: paso 5, imagen 1 de 1

Gently pry the antenna out of the front case

Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 4 otros colaboradores

Bailey Hughes

Miembro Desde 03/22/15

617 Reputación

6 Guías creadas

+ 7 más insignias

Equipo

Baylor, Team 5-8, Williams Spring 2015 Miembro de Baylor, Team 5-8, Williams Spring 2015

BU-WILLIAMS-S15S5G8

3 Miembros

6 Guías creadas

0 comentarios

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 7

Todo El Tiempo: 115