Repara tus cosas Comunidad Tienda

Ematic Model FTABMP2 Screen Replacement

Introducción

If your Ematic Model FTABMP2 has a cracked or damaged screen, refer to this guide to learn how to replace it. The screen on this device is a Full 4.3 LCD Screen Display with Touch Screen Digitizer Glass Panel.

Make sure your device is powered off before you begin.

Qué necesitas

  1. Ematic Model FTABMP2 Screen Replacement, Screen: paso 1, imagen 1 de 2 Ematic Model FTABMP2 Screen Replacement, Screen: paso 1, imagen 2 de 2

    • Gently insert the blue spudger in between the two sections of the tablet and go around breaking the glue seal.

    • Gently take off the back side of the tablet.

    Traducir

  3. Ematic Model FTABMP2 Screen Replacement: paso 2, imagen 1 de 2 Ematic Model FTABMP2 Screen Replacement: paso 2, imagen 2 de 2

    • Locate the light grey clamp on the motherboard and gently use two index fingers to disconnect the black LCD cable from the motherboard.

    Traducir

  4. Ematic Model FTABMP2 Screen Replacement: paso 3, imagen 1 de 1

    • Gently press on the white clamp using the blue spudger to remove the metal panel.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 5 otros colaboradores

Timothy

Miembro Desde 01/21/15

505 Reputación

5 Guías creadas

Insignias: 6

+ 3 más insignias

Equipo

USF Tampa, Team 9-2, Brown Winter 2015 Miembro de USF Tampa, Team 9-2, Brown Winter 2015

USFT-BROWN-W15S9G2

5 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 8

Todo El Tiempo: 216