Saltar al contenido principal

Ematic Model FTABMP2 Power Button Replacement

Qué necesitas

  1. Ematic Model FTABMP2 Power Button Replacement, Power Button: paso 1, imagen 1 de 2 Ematic Model FTABMP2 Power Button Replacement, Power Button: paso 1, imagen 2 de 2
    • Use the opening tool to pry open the device case.

  2. Ematic Model FTABMP2 Power Button Replacement: paso 2, imagen 1 de 2 Ematic Model FTABMP2 Power Button Replacement: paso 2, imagen 2 de 2
    • Disconnect the LCD cable from the motherboard by pressing together the two sides of the clamp.

    • This will separate the device into two pieces.

  3. Ematic Model FTABMP2 Power Button Replacement: paso 3, imagen 1 de 1
    • The old power button will fall out by itself.

    • Replace it with the replacement button and secure it by clicking it into place.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Timothy

Miembro Desde 01/21/15

505 Reputación

5 Guías creadas

Equipo

USF Tampa, Team 9-2, Brown Winter 2015 Miembro de USF Tampa, Team 9-2, Brown Winter 2015

USFT-BROWN-W15S9G2

5 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 174