Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the four screws (size: 3.175mm) on the left and right side of the Element Electronics GC-1020 device using the PH#0 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully pull the back of the device (the silver portion) apart from the rest of the device.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the visible Philips head screws (size: 3.968 mm) on the motherboard located on the top of left and right sides. Use a PH #0 sized screw driver head for removal.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully bend the plastic frame to remove the motherboard.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
The display is attached to a dark yellow, flimsy, plastic material. This material is then attached to the motherboard. Tear off the plastic, successfully detaching the motherboard and display from each other.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Once the display is by itself, separate from the rest of the device, you are ready to put in your new display.
-
Cancelar: No complete esta guía.
2 personas más completaron esta guía.
Un comentario
but can i ask do you know how to reboot the software ?
i mean we try to put in our music or video or image inside. can it be done