Repara tus cosas Comunidad Tienda

Electric Bike Throttle Replacement

Introducción

Use this guide to replace your Electric Bike Throttle.

Qué necesitas

  1. Electric Bike Throttle Replacement, Brake: paso 1, imagen 1 de 1

    • Before starting to disassemble your electric bike, turn the power off.

    • Remove the 3/32 inch Allen screw.

    • When removing Allen screw, make sure the driver is well seated because they are simple to strip.

    Editar

  2. Electric Bike Throttle Replacement, Throttle: paso 2, imagen 1 de 1

    • Locate the throttle Allen screw.

    • Remove the 5/64 inch Allen screw.

    Editar

  3. Electric Bike Throttle Replacement, Throttle: paso 3, imagen 1 de 1

    • Slide the Throttle off.

    • When removing the throttle, be careful. Remove it slowly to avoid damaging the wire.

    Editar

  5. Electric Bike Throttle Replacement, Control Box: paso 4, imagen 1 de 1

    • Remove the following screws.

    • 2 mm Philips screws.

    Editar

  6. Electric Bike Throttle Replacement: paso 5, imagen 1 de 1

    • Open up the control box.

    Editar

  7. Electric Bike Throttle Replacement: paso 6, imagen 1 de 1

    • Track the throttle wire.

    • To ensure you don't lose it, you should mark it.

    Editar

  8. Electric Bike Throttle Replacement: paso 7, imagen 1 de 1

    • Locate the throttle wire.

    • Disconnect the throttle wire plug from the controller wire plug.

    • Take caution while handling these wires. You can easily damage them.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Ali Al-hamadani

Miembro Desde 10/06/22

145 Reputación

1 Guía escrita

Insignias: 1

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 14

Ultimos 30 días: 50

Todo El Tiempo: 978