Saltar al contenido principal

Ecovacs DEEBOT DN622.11 Battery Replacement

Qué necesitas

  1. Ecovacs DEEBOT DN622.11 Battery Replacement, Battery: paso 1, imagen 1 de 3 Ecovacs DEEBOT DN622.11 Battery Replacement, Battery: paso 1, imagen 2 de 3 Ecovacs DEEBOT DN622.11 Battery Replacement, Battery: paso 1, imagen 3 de 3
    • Here is the DEEBOT DN622.11 also know as a N79S.

    • Turn it over to have the underside exposed

    • Locate the two Phillips head screws that hold the battery cover in place

  2. Ecovacs DEEBOT DN622.11 Battery Replacement: paso 2, imagen 1 de 3 Ecovacs DEEBOT DN622.11 Battery Replacement: paso 2, imagen 2 de 3 Ecovacs DEEBOT DN622.11 Battery Replacement: paso 2, imagen 3 de 3
    • Unscrews the two Phillips head screws

    • Remove the battery cover

    • Note position of the battery in the battery compartment

  3. Ecovacs DEEBOT DN622.11 Battery Replacement: paso 3, imagen 1 de 2 Ecovacs DEEBOT DN622.11 Battery Replacement: paso 3, imagen 2 de 2
    • Lift the battery out of the compartment

    • Disconnect the battery connector by squeezing the tab on the female end of the connector. The battery can now be replaced.

Conclusión

To reassemble your Deebot, follow these instructions in reverse order.

2 personas más completaron esta guía.

oldturkey03

Miembro Desde 09/29/10

783,261 Reputación

119 Guías creadas

Equipo

Global Fixers Miembro de Global Fixers

Community

33 Miembros

549 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 21

Ultimos 30 días: 110

Todo El Tiempo: 4,242