Eco X Gear Voice Coil Replacement - Guía de reparación iFixit

Introducción

You will need a phillips head screw driver and needle nose pliers to complete this task. Before opening the device, ensure that there is no power to avoid damaging the electronics or harming yourself.

Qué necesitas

Paso 1 Frame

Eco X Gear Voice Coil Replacement, Frame: paso 1, imagen 1 de 1

Disconnect any power source and/or turn off device.

Paso 2

Eco X Gear Voice Coil Replacement: paso 2, imagen 1 de 1

Remove the 15 rubber plugs from the cavities using needle nose pliers.

Paso 3

Eco X Gear Voice Coil Replacement: paso 3, imagen 1 de 1

Use a phillips head screwdriver to remove the fifteen 6.4mm screws.

Paso 4

Eco X Gear Voice Coil Replacement: paso 4, imagen 1 de 1

Carefully separate the two sections of the frame.
Wires still connect the two sections. Be cautious to avoid damaging the wires, terminals, and electronics.

Paso 5 Voice Coil

Eco X Gear Voice Coil Replacement, Voice Coil: paso 5, imagen 1 de 1

Disconnect the wiring to improve accessibility to the cones.

Paso 6

Eco X Gear Voice Coil Replacement: paso 6, imagen 1 de 2

Eco X Gear Voice Coil Replacement: paso 6, imagen 2 de 2

Remove the four screws that hold down the speaker and pry up the speaker from the frame.

Paso 7

Eco X Gear Voice Coil Replacement: paso 7, imagen 1 de 1

Once the voice coil is removed, solder it back onto the bracket or replace the voice coil entirely.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 1 otro colaborador

James Lipsett

Miembro Desde 03/20/17

625 Reputación

6 Guías creadas

+ 7 más insignias

Equipo

UMass Dartmouth, Team S9-G3, Martin Spring 2017 Miembro de UMass Dartmouth, Team S9-G3, Martin Spring 2017

UMASSD-MARTIN-S17S9G3

2 Miembros

6 Guías creadas

0 comentarios

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 7

Ultimos 30 días: 13

Todo El Tiempo: 184