Repara tus cosas Comunidad Tienda

Eco X Gear LED Display Replacement

Introducción

You will need a phillips head screw driver, needle nose pliers, solder, and a soldering iron to complete this task. Before opening the device, ensure that there is no power to avoid damaging the electronics or harming yourself.

Qué necesitas

  1. Eco X Gear LED Display Replacement, Frame: paso 1, imagen 1 de 1

    • Disconnect any power source and/or turn off device.

    Editar

  2. Eco X Gear LED Display Replacement: paso 2, imagen 1 de 1

    • Remove the 15 rubber plugs from the cavities using needle nose pliers.

    Editar

  4. Eco X Gear LED Display Replacement: paso 3, imagen 1 de 1

    • Use a phillips head screwdriver to remove the fifteen 6.4mm screws.

    Editar

  5. Eco X Gear LED Display Replacement: paso 4, imagen 1 de 1

    • Carefully separate the two sections of the frame.

    • Wires still connect the two sections. Be cautious to avoid damaging the wires, terminals, and electronics.

    Editar

  6. Eco X Gear LED Display Replacement, LED Display: paso 5, imagen 1 de 1

    • Locate the terminals coming off of the backside of the LED lights. Cut the terminals to remove the light from the frame.

    Editar

  7. Eco X Gear LED Display Replacement: paso 6, imagen 1 de 1

    • Insert the new LED light into the frame. Use the solder and soldering iron to reconnect the terminals to the new lights.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 1 otro colaborador

James Lipsett

Miembro Desde 03/20/17

625 Reputación

6 Guías creadas

Insignias: 10

+ 7 más insignias

Equipo

UMass Dartmouth, Team S9-G3, Martin Spring 2017 Miembro de UMass Dartmouth, Team S9-G3, Martin Spring 2017

UMASSD-MARTIN-S17S9G3

2 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 5

Ultimos 30 días: 13

Todo El Tiempo: 140