Repara tus cosas Comunidad Tienda

Eco X Gear Cone Replacement

Introducción

You will need a phillips head screw driver and needle nose pliers to complete this task. Before opening the device, ensure that there is no power to avoid damaging the electronics or harming yourself.

Qué necesitas

  1. Eco X Gear Cone Replacement, Frame: paso 1, imagen 1 de 1

    • Disconnect any power source and/or turn off device.

    Editar

  2. Eco X Gear Cone Replacement: paso 2, imagen 1 de 1

    • Remove the 15 rubber plugs from the cavities using needle nose pliers.

    Editar

  3. Eco X Gear Cone Replacement: paso 3, imagen 1 de 1

    • Use a phillips head screwdriver to remove the fifteen 6.4mm screws.

    Editar

  5. Eco X Gear Cone Replacement: paso 4, imagen 1 de 1

    • Carefully separate the two sections of the frame.

    • Wires still connect the two sections. Be cautious to avoid damaging the wires, terminals, and electronics.

    Editar

  6. Eco X Gear Cone Replacement, Cone: paso 5, imagen 1 de 1

    • Disconnect the wiring to improve accessibility to the cones.

    Editar

  7. Eco X Gear Cone Replacement: paso 6, imagen 1 de 2 Eco X Gear Cone Replacement: paso 6, imagen 2 de 2

    • Remove the four screws which hold down the speaker. Then, pry up the speaker from the frame.

    Editar

  8. Eco X Gear Cone Replacement: paso 7, imagen 1 de 1

    • To replace the cone, remove the existing one by peeling it off of the speaker with needle nose pliers.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 1 otro colaborador

James Lipsett

Miembro Desde 03/20/17

625 Reputación

6 Guías creadas

Insignias: 10

+ 7 más insignias

Equipo

UMass Dartmouth, Team S9-G3, Martin Spring 2017 Miembro de UMass Dartmouth, Team S9-G3, Martin Spring 2017

UMASSD-MARTIN-S17S9G3

2 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 6

Ultimos 30 días: 12

Todo El Tiempo: 148