Saltar al contenido principal

Qué necesitas

  1. Dyson V8 Absolute Bin Replacement, Bin: paso 1, imagen 1 de 1
    • Set the device upright on a flat surface and detach the wand.

    • Pull the red bin release trigger, on top of the cyclone. This will require some force.

  2. Dyson V8 Absolute Bin Replacement: paso 2, imagen 1 de 2 Dyson V8 Absolute Bin Replacement: paso 2, imagen 2 de 2
    • Pull up on the latch until it's fully extend.

    • The bin will open to dispense debris once the red latch is pulled.

  3. Dyson V8 Absolute Bin Replacement: paso 3, imagen 1 de 2 Dyson V8 Absolute Bin Replacement: paso 3, imagen 2 de 2
    • Push the red circular button to release the latch on the cyclone.

    • The cyclone should release and be fully detached from the device.

  4. Dyson V8 Absolute Bin Replacement: paso 4, imagen 1 de 2 Dyson V8 Absolute Bin Replacement: paso 4, imagen 2 de 2
    • Push on the red release button on the bottom of the bin.

    • The bin should slide away from the handle.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Equipo

UW Tacoma, Team S1-G5, Rose Fall 2017 Miembro de UW Tacoma, Team S1-G5, Rose Fall 2017

UWT-ROSE-F17S1G5

4 Miembros

15 Guías creadas

2 comentarios

My bin seems to be more difficult to open all of the sudden and I have taken it all apart and put it back together. Still having the issue where the bin doesnt open when the cyclone pops up. HELP please

Rob Coughlin - Contestar

I have a Dyson v8 and the red release button is stuck. What do I do.

Pamela Wanklyn - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 8

Ultimos 7 días: 54

Ultimos 30 días: 267

Todo El Tiempo: 17,398