Saltar al contenido principal
  1. Dyson DC58 Bin Replacement, Bin: paso 1, imagen 1 de 1
    • Make sure your vacuum is unplugged.

    • Avoid pressing the red trigger on the vacuum handle; this will power on the vacuum.

  2. Dyson DC58 Bin Replacement: paso 2, imagen 1 de 1
    • Locate the red lever parallel to the red trigger and on the side of the clear bin.

  3. Dyson DC58 Bin Replacement: paso 3, imagen 1 de 1
    • Push the red lever downward to open the clear bin. You may need to do this over a trash bin if there is debris in the clear bin.

  4. Dyson DC58 Bin Replacement: paso 4, imagen 1 de 2 Dyson DC58 Bin Replacement: paso 4, imagen 2 de 2
    • Push the red lever downward again while pulling the clear bin away from the main body of the Dyson vacuum.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Ian Sloan

Miembro Desde 17/09/15

161 Reputación

1 Guía escrita

Equipo

CSU Fullerton, Team 2-4, Bruce Fall 2015 Miembro de CSU Fullerton, Team 2-4, Bruce Fall 2015

CSUF-BRUCE-F15S2G4

4 Miembros

17 Guías creadas

2 comentarios

The bin is stuck and won’t come off, although I have followed the directions above.

Marcy Altimano - Contestar

I think the reassembly instructions should be numbered “Step 5” and printed right below Step 4. They aren’t that easy to see.

Mary Miraglia - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 10

Ultimos 30 días: 39

Todo El Tiempo: 12,371