Repara tus cosas Comunidad Tienda

Dyson DC56 Attachments Replacement

Introducción

The attachment holder is important to keep the attachment steady while using the vacuum. Without a proper way to hold attachments the vacuum can become unusable.

Qué necesitas

  1. Dyson DC56 Attachments Replacement, Dust Bin: paso 1, imagen 1 de 1

    • Make sure the vacuum is unplugged.

    • Warning: Avoid pressing the red trigger because it will turn on and begin suction.

    Editar

  2. Dyson DC56 Attachments Replacement: paso 2, imagen 1 de 1

    • Locate the purple button at the top of the device.

    Editar

  3. Dyson DC56 Attachments Replacement: paso 3, imagen 1 de 1

    • Separate the device with the purple button.

    Editar

  4. Dyson DC56 Attachments Replacement: paso 4, imagen 1 de 1

    • Locate the dust bin's red release lever on the side of the device.

    • Make sure if the dust bin is full you open the vacuum over a trash can.

    Editar

  6. Dyson DC56 Attachments Replacement: paso 5, imagen 1 de 1

    • Push the red lever to release the dust bin lid.

    Editar

  7. Dyson DC56 Attachments Replacement: paso 6, imagen 1 de 1

    • Locate the red lever below the vacuum.

    Editar

  8. Dyson DC56 Attachments Replacement: paso 7, imagen 1 de 1

    • Push the red lever, pull the back up and away from the dust bin to separate them.

    Editar

  9. Dyson DC56 Attachments Replacement, Attachments: paso 8, imagen 1 de 1

    • Locate two screws at the back of the attachment holder.

    Editar

  10. Dyson DC56 Attachments Replacement: paso 9, imagen 1 de 1

    • Use a T8-Torque screwdriver to take out the two 26mm screws out.

    Editar

  11. Dyson DC56 Attachments Replacement: paso 10, imagen 1 de 1

    • Loosen the attachment holder by using a metal spudger.

    Editar

  12. Dyson DC56 Attachments Replacement: paso 11, imagen 1 de 1

    • Remove the attachment holder.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 4 otros colaboradores

John Czerkawski

Miembro Desde 10/02/17

427 Reputación

4 Guías creadas

Insignias: 7

+ 4 más insignias

Equipo

USF Tampa, Team S10-G1, Thompson Fall 2017 Miembro de USF Tampa, Team S10-G1, Thompson Fall 2017

USFT-THOMPSON-F17S10G1

4 Miembros

11 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 4

Todo El Tiempo: 762