Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the canister from the vacuum.
-
Disconnect the telescopic vacuum wand.
-
Remove the two T15 Torx screws securing the switch cover to the vacuum.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Push outward on the two plastic clips that secure the switch cover to the vacuum.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Holding them by their white plastic coverings, firmly pull the two wires from the power switch.
-
Cancelar: No complete esta guía.
19 personas más completaron esta guía.
10 comentarios
The comment I listed below is not mine. I copied it from a Mr. Tim Swift who wrote it on 06/28/2015. Had I not have seen his comment, I would have said the exact same thing.
I have only one other thing to say......AWESOME!!
Bob Williams
robertvwilliams@comcast.net
"Thank you to the awesome student who made this tutorial! It worked perfectly and saved me the MAJOR expense of a professional repair. Great job!"
Thanks from a 70 year old non-mechanical female with no torque wrench. I followed this tutorial a few months ago and found that my switch had simply come undone and I reinserted it but couldn't attach orange thing back cause switch kept slipping loose. I taped it up around switch so I wouldn't get electrocuted when turning on. Has worked fine til now, and I suppose my switch has finally failed, so I'm ordering new one. This Dyson was a refurbished one I got fairly cheap (for a Dyson) 12 years ago! SO, THANKS MUCH!!
Brilliant and saved me over £100 which is the cost of a Dyson engineer to attend plus switch. Name a charity.