Saltar al contenido principal

Dyson Cinetic Big Ball Animal Upright Hose Replacement

Qué necesitas

  1. Dyson Cinetic Big Ball Animal Upright Hose Replacement, Hose: paso 1, imagen 1 de 2 Dyson Cinetic Big Ball Animal Upright Hose Replacement, Hose: paso 1, imagen 2 de 2
    • Lift off the dust bin from the Dyson.

  2. Dyson Cinetic Big Ball Animal Upright Hose Replacement: paso 2, imagen 1 de 1
    • Locate the removable hose on the back of the Dyson.

    • Pull up on the hose in order to remove the top half of the hose.

  3. Dyson Cinetic Big Ball Animal Upright Hose Replacement: paso 3, imagen 1 de 1
    • Locate the red tab on the frontside of Dyson.

  4. Dyson Cinetic Big Ball Animal Upright Hose Replacement: paso 4, imagen 1 de 3 Dyson Cinetic Big Ball Animal Upright Hose Replacement: paso 4, imagen 2 de 3 Dyson Cinetic Big Ball Animal Upright Hose Replacement: paso 4, imagen 3 de 3
    • Lift up the red tab with the screwdriver while simultaneously pulling on the back hose.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Karla Sunjara

Miembro Desde 01/24/17

891 Reputación

5 Guías creadas

Equipo

Cal Poly, Team S13-G1, Banghart Winter 2017 Miembro de Cal Poly, Team S13-G1, Banghart Winter 2017

CPSU-BANGHART-W17S13G1

3 Miembros

10 Guías creadas

2 comentarios

Following step 4, I tried to “lift” the red tab with my screwdriver. It did not budge. After enlarging the photo, I saw that the tab can be seen from both sides. Therefore, I tried “pushing” the red tab instead of “lifting” it, and it popped right off. “Lifting” and “pushing” are different actions.

vlkea01 - Contestar

I've taken the small hose out (in the picture, it is in the center at the bottom of the balls) now I cannot get it back in - at one point I thought I had it snapped back in but it didn't stay - any ideas?

K BS - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 16

Ultimos 30 días: 76

Todo El Tiempo: 11,760