Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

The bin assembly plastic is the transparent compartment that holds all the dust and dirt that is collected while vacuuming. The bin assembly is within the purple bin.

  1. Push down the red button to remove the bin from the Dyson. Push down the red button to remove the bin from the Dyson.
    • Push down the red button to remove the bin from the Dyson.

  2. Press the red button again to open the bottom of the bin.
    • Press the red button again to open the bottom of the bin.

  3. Press the grey button (where index finger is located) and slide the bin assembly out. Press the grey button (where index finger is located) and slide the bin assembly out.
    • Press the grey button (where index finger is located) and slide the bin assembly out.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Karla Sunjara

Miembro Desde 24/01/17

732 Reputación

5 Guías creadas

Equipo

Cal Poly, Team S13-G1, Banghart Winter 2017 Miembro de Cal Poly, Team S13-G1, Banghart Winter 2017

CPSU-BANGHART-W17S13G1

3 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 5

Ultimos 30 días: 20

Todo El Tiempo: 1,818