Saltar al contenido principal

Qué necesitas

  1. Dyson Ball Multi Floor Upright Main Filter  Replacement, Main Filter: paso 1, imagen 1 de 3 Dyson Ball Multi Floor Upright Main Filter  Replacement, Main Filter: paso 1, imagen 2 de 3 Dyson Ball Multi Floor Upright Main Filter  Replacement, Main Filter: paso 1, imagen 3 de 3
    • For the main filter, locate the body of the vacuum by looking for the cylinder with the orange top. Use your thumb to press down on the red button towards the back of the orange piece.

    • After pressing down on the red button, the body of the vacuum will easily be removed from the vacuum stand.

  2. Dyson Ball Multi Floor Upright Main Filter  Replacement: paso 2, imagen 1 de 3 Dyson Ball Multi Floor Upright Main Filter  Replacement: paso 2, imagen 2 de 3 Dyson Ball Multi Floor Upright Main Filter  Replacement: paso 2, imagen 3 de 3
    • Once the main body of the vacuum is removed, locate the clear handle on the top of the body. There is a purple label that says "Filter".

    • Lift up the clear handle to reveal the main cylindrical filter. Pull out the purple filter piece to replace.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Nicole Abraham

Miembro Desde 26/01/17

821 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 21-2, Maness Winter 2017 Miembro de Cal Poly, Team 21-2, Maness Winter 2017

CPSU-MANESS-W17S21G2

4 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 8

Ultimos 30 días: 52

Todo El Tiempo: 2,726