Saltar al contenido principal

Introducción

This guide will demonstrate how to remove the filter in the cyclone canister and the base "ball." Filters may need to be replaced or cleaned periodically.

Herramientas

No se especificaron herramientas.

  1. Turn off and unplug the vacuum. Turn off and unplug the vacuum.
    • Turn off and unplug the vacuum.

  2. Press the red release button and pull the canister up and away.
    • Press the red release button and pull the canister up and away.

  3. Pull up on the top handle while lifting up on the filter release latch. Pull up on the top handle while lifting up on the filter release latch.
    • Pull up on the top handle while lifting up on the filter release latch.

  4. Pull the filter straight up to remove.
    • Pull the filter straight up to remove.

  5. Lie the vacuum on its back so the blue dial is facing you. Lie the vacuum on its back so the blue dial is facing you.
    • Lie the vacuum on its back so the blue dial is facing you.

  6. Grip the grooves on the blue dial and unscrew counterclockwise until the side housing is free. Grip the grooves on the blue dial and unscrew counterclockwise until the side housing is free.
    • Grip the grooves on the blue dial and unscrew counterclockwise until the side housing is free.

  7. Turn 1/4 turn counterclockwise to release filter, then pull off to remove.
    • Turn 1/4 turn counterclockwise to release filter, then pull off to remove.

Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

Mitchell Klein

Miembro Desde 23/04/17

602 Reputación

2 Guías creadas

Equipo

Cal Poly, Team S15-G5, Banghart Spring 2017 Miembro de Cal Poly, Team S15-G5, Banghart Spring 2017

CPSU-BANGHART-S17S15G5

4 Miembros

16 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 56

Ultimos 7 días: 203

Ultimos 30 días: 853

Todo El Tiempo: 16,837