1. Remove the six 13 mm casing screws with the #0 Phillips screwdriver.
    • Remove the six 13 mm casing screws with the #0 Phillips screwdriver.

  2. Separate the screwdriver casing halves with the plastic opening tool. Separate the screwdriver casing halves with the plastic opening tool.
    • Separate the screwdriver casing halves with the plastic opening tool.

  3. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    Todos somos Genios

    Share your repair story with #ImAGenius

  4. Slide the bit chuck assembly out from the casing half.
    • Slide the bit chuck assembly out from the casing half.

  5. Apply a dab of grease to the end of the drill motor coupler.
    • Apply a dab of grease to the end of the drill motor coupler.

  6. Insert new bit chuck assembly into the drill casing.
    • Insert new bit chuck assembly into the drill casing.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Tyler Vincent

Miembro Desde 24/02/14

428 Reputación

4 Guías creadas

Equipo

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 315