Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove SIM card tray from the device with a plastic opening tool.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Once SIM card tray is removed press the spudger between the plastic case and the frame of the device until you hear a snap.
-
Work your away around the device until all the plastic clips are undone.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the five screws on top of the device with a T5 Torx.
-
Remove the single screw holding the camera with a T4 Torx.
-
Remove the two screws on the bottom of the device with a T5 Torx.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Once the screws are removed, use a plastic spudger and lift up the two plastic pieces that were secured by the screws.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the four T5 Torx screws securing the motherboard.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Gently pry the motherboard out of the frame of the device.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Once the motherboard is free flip it over on its back so all the components are showing.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
To fully replace the charging port you need to desolder the port and solder a new one in.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.