Repara tus cosas Comunidad Tienda

Droid Ultra XT1080 Charging Port Replacement

Introducción

This guide will teach you how to replace the charging port of your device.

Qué necesitas

  1. Droid Ultra XT1080 Charging Port Replacement, Charging Port: paso 1, imagen 1 de 1

    • Remove SIM card tray from the device with a plastic opening tool.

    Editar

  2. Droid Ultra XT1080 Charging Port Replacement: paso 2, imagen 1 de 1

    • Once SIM card tray is removed press the spudger between the plastic case and the frame of the device until you hear a snap.

    • Work your away around the device until all the plastic clips are undone.

    • Be gentle with the plastic to make sure it doesn't break.

    Editar

  3. Droid Ultra XT1080 Charging Port Replacement: paso 3, imagen 1 de 1

    • Remove the five screws on top of the device with a T5 Torx.

    • Remove the single screw holding the camera with a T4 Torx.

    • Remove the two screws on the bottom of the device with a T5 Torx.

    Editar

  5. Droid Ultra XT1080 Charging Port Replacement: paso 4, imagen 1 de 2 Droid Ultra XT1080 Charging Port Replacement: paso 4, imagen 2 de 2

    • Once the screws are removed, use a plastic spudger and lift up the two plastic pieces that were secured by the screws.

    Editar

  6. Droid Ultra XT1080 Charging Port Replacement: paso 5, imagen 1 de 1

    • Remove the four T5 Torx screws securing the motherboard.

    Editar

  7. Droid Ultra XT1080 Charging Port Replacement: paso 6, imagen 1 de 1

    • Gently pry the motherboard out of the frame of the device.

    Editar

  8. Droid Ultra XT1080 Charging Port Replacement: paso 7, imagen 1 de 2 Droid Ultra XT1080 Charging Port Replacement: paso 7, imagen 2 de 2

    • Once the motherboard is free flip it over on its back so all the components are showing.

    Editar

  9. Droid Ultra XT1080 Charging Port Replacement: paso 8, imagen 1 de 1

    • To fully replace the charging port you need to desolder the port and solder a new one in.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 1 otro colaborador

knoyes

Miembro Desde 10/30/18

785 Reputación

5 Guías creadas

Insignias: 8

+ 5 más insignias

Equipo

UMass Dartmouth, Team S3-G8, Peak Fall 2018 Miembro de UMass Dartmouth, Team S3-G8, Peak Fall 2018

UMASSD-PEAK-F18S3G8

3 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 6

Todo El Tiempo: 850