Repara tus cosas Comunidad Tienda

Drobo FS DRDS2-A Power Switch Replacement

Introducción

How to replace the Power Switch

Qué necesitas

  1. Drobo FS DRDS2-A Power Switch Replacement, Case: paso 1, imagen 1 de 1

    • To start getting the case off remove the front panel so it's out of the way.

    Editar

  2. Drobo FS DRDS2-A Power Switch Replacement: paso 2, imagen 1 de 2 Drobo FS DRDS2-A Power Switch Replacement: paso 2, imagen 2 de 2

    • Next remove the screws from the feet of the case with a phillips head screwdriver.

    Editar

  3. Drobo FS DRDS2-A Power Switch Replacement: paso 3, imagen 1 de 1

    • To remove the case, place the Drobo on its back and slide the case off.

    Editar

  5. Drobo FS DRDS2-A Power Switch Replacement, Power Switch: paso 4, imagen 1 de 3 Drobo FS DRDS2-A Power Switch Replacement, Power Switch: paso 4, imagen 2 de 3 Drobo FS DRDS2-A Power Switch Replacement, Power Switch: paso 4, imagen 3 de 3

    • Press tabs to release back cover and lift off

    Editar

  6. Drobo FS DRDS2-A Power Switch Replacement: paso 5, imagen 1 de 2 Drobo FS DRDS2-A Power Switch Replacement: paso 5, imagen 2 de 2

    • Push tabs in and carefully pull out the front facer and drive shelves

    Editar

  7. Drobo FS DRDS2-A Power Switch Replacement: paso 6, imagen 1 de 2 Drobo FS DRDS2-A Power Switch Replacement: paso 6, imagen 2 de 2

    • Unscrew the back face by removing the screw on the back sides, then slide top face apart from the others

    • If you have a Drobo 5N2, you may also need to remove the 3 screws on each side.

    Editar

  8. Drobo FS DRDS2-A Power Switch Replacement: paso 7, imagen 1 de 2 Drobo FS DRDS2-A Power Switch Replacement: paso 7, imagen 2 de 2

    • Carefully unplug the Power Switch and Fan wires.

    Editar

  9. Drobo FS DRDS2-A Power Switch Replacement: paso 8, imagen 1 de 1

    • Press tabs on Power Switch to release the Power Switch and Push out.

    • A Spudger like object is helpful for pushing in the tabs if the fan is not removed also

    Editar

  10. Drobo FS DRDS2-A Power Switch Replacement: paso 9, imagen 1 de 2 Drobo FS DRDS2-A Power Switch Replacement: paso 9, imagen 2 de 2

    • Finally pull the old switch out and pop the new one in.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 3 otros colaboradores

Rye Cassan

Miembro Desde 01/24/17

155 Reputación

1 Guía escrita

Insignias: 5

+ 2 más insignias

Equipo

Cal Poly, Team 10-4, Banghart Winter 2017 Miembro de Cal Poly, Team 10-4, Banghart Winter 2017

CPSU-BANGHART-W17S10G4

3 Miembros

5 Guías creadas

4 comentarios

Hello,

great info I found here, but where do I buy a replacement button for my Drobo in Europe?

Kind regards and thank you in advance,

Heinrich

Heinrich Voelkel - Contestar

Hi, where do I find a replacement power switch for my Drobo 5N? BTW, thanks for the great tutorial!

Stephen R Parrott - Contestar

I took my Drobo apart and the printed numbers on the switch are R13-112. I ordered these on Amazon:

https://www.amazon.com/Twidec-Rocker-Tog...

I put it in, crossed my fingers, and BAM, worked like a charm. Hope that helps all the future DIY’ers.

tdubs - Contestar

Good article - thanks. Discovered my Drobo 5N (cir 2014) has a 3-wire spring-loaded switch with 2V LED (green) (wires: Red - White - Blue) Press once to turn on; Press and hold to manually turn off. Can simple R13-112 SPST switch be substituted?

John W - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 14

Ultimos 30 días: 40

Todo El Tiempo: 2,102