Repara tus cosas Comunidad Tienda

Drill Master Heat Gun Fan Replacement

Introducción

The internal fan keeps your machine from overheating. A faulty fan can also cause smoking. To remedy these problems, use this guide to replace your fan.

Qué necesitas

  1. Drill Master Heat Gun Fan Replacement, Fan: paso 1, imagen 1 de 1

    • Be sure the heat gun is unplugged before starting this process.

    • Remove the seven 14mm screws from the side of the drill using the PH#0 screwdriver.

    • You will need a screwdriver extension.

    Editar

  2. Drill Master Heat Gun Fan Replacement: paso 2, imagen 1 de 1

    • Remove the 8mm screw from underside of barrel using the PH#0 screwdriver.

    • Don't try to open the casing just yet.

    Editar

  3. Drill Master Heat Gun Fan Replacement: paso 3, imagen 1 de 3 Drill Master Heat Gun Fan Replacement: paso 3, imagen 2 de 3 Drill Master Heat Gun Fan Replacement: paso 3, imagen 3 de 3

    • Remove the barrel casing on either end by twisting and pulling each side off.

    Editar

  5. Drill Master Heat Gun Fan Replacement: paso 4, imagen 1 de 1

    • Remove the top casing to reveal inside of drill. You might have to tug a little harder for this one.

    Editar

  6. Drill Master Heat Gun Fan Replacement: paso 5, imagen 1 de 1

    • Remove the metal casing and fan cover from the fan unit.

    Editar

  7. Drill Master Heat Gun Fan Replacement: paso 6, imagen 1 de 1

    • Bend the metal prongs backward that connect the fan motor to the plastic cap.

    • Bending the brackets too far back can cause the brackets to break.

    Editar

  8. Drill Master Heat Gun Fan Replacement: paso 7, imagen 1 de 1

    • Remove the plastic cap from the motor,

    • This will allow you to work only with the motor and fan.

    Editar

  9. Drill Master Heat Gun Fan Replacement: paso 8, imagen 1 de 1

    • Remove the fan by pulling it from the motor rod and replace.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 19

Todo El Tiempo: 2,419