Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Position the tablet so the ports and screws are facing you.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two 2.5mm screws using the Phillips #00 precision screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the plastic opening tool to assist in removing the back cover.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Upon removing the back cover position the tablet as seen in the picture.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Install the new speaker by soldering the wires to the motherboard. For additional soldering instructions please view this page: Cómo soldar y desoldar conexiones
-