Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

Replace the speaker via soldering.

  1. Position the tablet so the ports and screws are facing you.
    • Position the tablet so the ports and screws are facing you.

  2. Remove the two 2.5mm screws using the Phillips #00 precision screwdriver.
    • Remove the two 2.5mm screws using the Phillips #00 precision screwdriver.

  3. Use the plastic opening tool to assist in removing the back cover. Use the plastic opening tool to assist in removing the back cover.
    • Use the plastic opening tool to assist in removing the back cover.

  4. ABRIR TODAS LAS PESTAÑAS

    Kits de actualización de RAM para Mac

    Compra kits

    Suficiente RAM
    para todas las pestañas

    Compra kits
  5. Upon removing the back cover position the tablet as seen in the picture.
    • Upon removing the back cover position the tablet as seen in the picture.

  6. Remove the speaker from the back cover. Remove the speaker from the back cover.
    • Remove the speaker from the back cover.

  7. Remove the black and red wire from the Motherboard.
    • Remove the black and red wire from the Motherboard.

  8. Install the new speaker by soldering the wires to the motherboard. For additional soldering instructions please view this page: Cómo soldar y desoldar conexiones
Conclusión

To reassemble your device, follow these instructions in reverse order.

Stacey Mattila

Miembro Desde 18/03/15

543 Reputación

5 Guías creadas

Equipo

Michigan Tech, Team 1-4, Lauer Spring 2015 Miembro de Michigan Tech, Team 1-4, Lauer Spring 2015

MTU-LAUER-S15S1G4

2 Miembros

10 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 112