Saltar al contenido principal

Dopo Double Power 7 Speaker Replacement

Qué necesitas

  1. Dopo Double Power 7 Speaker Replacement, Rear Panel: paso 1, imagen 1 de 1
    • The rear panel is secured to the front case and can simply be pried apart without damage.

  2. Dopo Double Power 7 Speaker Replacement: paso 2, imagen 1 de 1
    • Carefully, wedge the plastic opening tool in-between the seam that separates both halves of the tablet.

  3. Dopo Double Power 7 Speaker Replacement: paso 3, imagen 1 de 1
    • Run the plastic opening tool along the seam looking for the clips and lift up on the rear panel.

  4. Dopo Double Power 7 Speaker Replacement: paso 4, imagen 1 de 1
    • The rear panel should come completely off.

  5. Dopo Double Power 7 Speaker Replacement, Speaker: paso 5, imagen 1 de 1
    • Using wire cutters, cut the red and black wires connected to the speaker.

    • The speaker is magnetized and not permanently attached.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

mike pelosi

Miembro Desde 10/30/15

682 Reputación

6 Guías creadas

Equipo

UMass Dartmouth, Team 1-2, Miles Fall 2015 Miembro de UMass Dartmouth, Team 1-2, Miles Fall 2015

UMASSD-MILES-F15S1G2

4 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 165