Dopo Double Power 7 Motherboard Replacement

Introducción

Use this guide to replace the motherboard in your Dopo Double Power 7.

Having a functioning motherboard is crucial because it is the component that holds all of the hardware that allows your device to work such as storage devices, the processor, and the power supply.

If you are experiencing problems such as no power, random errors, or crashes you may need to replace the motherboard of your Dopo Double Power.

A skill you may need for this repair is soldering.

Qué necesitas

Paso 1 Rear Panel

Dopo Double Power 7 Motherboard Replacement, Rear Panel: paso 1, imagen 1 de 1

The rear panel is secured to the front case and can simply be pried apart without damage.

Editar

Paso 2

Carefully, wedge the plastic opening tool in-between the seam that separates both halves of the tablet.

Editar

Paso 3

Run the plastic opening tool along the seam looking for the clips and lift up on the rear panel.

Editar

Paso 4

The rear panel should come completely off.

Editar

Paso 5 Motherboard

Dopo Double Power 7 Motherboard Replacement, Motherboard: paso 5, imagen 1 de 1

Remove any static tape covering the motherboard.

Editar

Paso 6

Using the flat end of a spudger or tweezers, remove the three cables connected to the motherboard.
The cables can be disconnected by lifting up on the black section of the socket, as shown by the arrow.
Once the lever is lifted, pull out the cable by gently tugging on it.