Introducción
To repair or replace internal components such as the RAM, hard drive, WIFI card, fan etc., the back cover plate must be removed. Removing the cover will allow access to the internal components.
Qué necesitas
-
-
Remove the three 1.2mm Phillips #00 screws from the bottom panel.
-
-
Casi Terminas!
To reassemble your device, follow these instructions in reverse order.
Conclusión
To reassemble your device, follow these instructions in reverse order.
Equipo
USF Tampa, Team S2-G5, Nance Spring 2018 Miembro de USF Tampa, Team S2-G5, Nance Spring 2018
USFT-NANCE-S18S2G5
4 Miembros
8 Guías creadas
