Repara tus cosas Comunidad Tienda

Disassembling

Sólo Prerrequisito
Esta guía solo debería usarse como prerrequisito para otras guías. Por tanto, estará incompleta.

Introducción

If you are having issues with your Bose SoundDock XT and want to save money and repair the device yourself, you have come to the right place. These instructions will help you disassemble the SoundDock XT.

Qué necesitas

  1. Disassembling, Disassembling: paso 1, imagen 1 de 1

    • Remove six 10 mm length screws from the bottom panel of the SoundDock.XT using a #1 Phillips screwdriver.

    Editar

  2. Disassembling: paso 2, imagen 1 de 1

    • Remove the Front Panel, use a #2 Phillips screwdriver to remove the two 6.5 mm length front panel screws located under the bottom cover (highlighted in red circles in the photo).

    Editar

  4. Disassembling: paso 3, imagen 1 de 1

    • Next, use a plastic opening tool to slide under the edge of the front cover. Start edge located at the top of the left or right speaker and work your way around the speaker. Remove the front cover.

    Editar

  5. Disassembling: paso 4, imagen 1 de 2 Disassembling: paso 4, imagen 2 de 2

    • Use a wide nose tweezer to remove six rubber grommets from the front of the SoundDock XT.

    • Using pointed tweezers may damage the rubber grommet.

    Editar

  6. Disassembling: paso 5, imagen 1 de 1

    • Use a #2 screwdriver to remove the six 8.5 mm length screws from the speaker cover.

    Editar

  7. Disassembling: paso 6, imagen 1 de 1

    • Using a metal spudger, slide between the outer case and the front speaker cover. Work your way around the cover and remove the speaker cover. You now have access to the speakers.

    • Using the metal spudger may damage the plastic speaker cover.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 3 otros colaboradores

Tarissa Miller

Miembro Desde 10/01/15

218 Reputación

1 Guía escrita

Insignias: 13

+ 10 más insignias

Equipo

IUPUI, Team 1-4, Hagerty Fall 2015 Miembro de IUPUI, Team 1-4, Hagerty Fall 2015

IUPUI-HAGERTY-F15S1G4

5 Miembros

3 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 95