Saltar al contenido principal

Disassembling the Garmin eTrex Vista-H Outer Case

Qué necesitas

  1. Disassembling the Garmin eTrex Vista-H Outer Case, Removing Battery: paso 1, imagen 1 de 1
    • Flip the device to the backside, and locate the metal tab at the center of the back cover.

  2. Disassembling the Garmin eTrex Vista-H Outer Case: paso 2, imagen 1 de 1
    • Lift the metal tab up, and rotate it counterclockwise. This will unlock the back case cover.

  3. Disassembling the Garmin eTrex Vista-H Outer Case: paso 3, imagen 1 de 2 Disassembling the Garmin eTrex Vista-H Outer Case: paso 3, imagen 2 de 2
    • Lift the battery plate off to either insert or remove 2 AA batteries.

  4. Disassembling the Garmin eTrex Vista-H Outer Case, Disassembling the Garmin eTrex Vista-H Outer Case: paso 4, imagen 1 de 2 Disassembling the Garmin eTrex Vista-H Outer Case, Disassembling the Garmin eTrex Vista-H Outer Case: paso 4, imagen 2 de 2
    • With the wedge side of a spudger (or a small, flat head screwdriver), remove the black rubber case support from the device body.

  5. Disassembling the Garmin eTrex Vista-H Outer Case: paso 5, imagen 1 de 3 Disassembling the Garmin eTrex Vista-H Outer Case: paso 5, imagen 2 de 3 Disassembling the Garmin eTrex Vista-H Outer Case: paso 5, imagen 3 de 3
    • With the pick side of a spudger (or tweezers), peel the sticky tape from the device.

  6. Disassembling the Garmin eTrex Vista-H Outer Case: paso 6, imagen 1 de 1
    • Split the front and rear panels by inserting a small pointed tool (such as a pen point or a screwdriver tip SL1.5) in the 5 plastic tabs along the sides of the device.

    • Do not remove the back panels quickly. If too much force is applied, there is a wire connection that will break.

    • CAUTION! Be careful not to force the tabs inward. This will result in broken tabs.

  7. Disassembling the Garmin eTrex Vista-H Outer Case: paso 7, imagen 1 de 2 Disassembling the Garmin eTrex Vista-H Outer Case: paso 7, imagen 2 de 2
    • With tweezers (or your fingernails), carefully disconnect the wires between the PC input and the motherboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

7 personas más completaron esta guía.

Ryan Green

Miembro Desde 10/17/10

93 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 21-30, Regan Fall 2010 Miembro de Cal Poly, Team 21-30, Regan Fall 2010

CPSU-REGAN-F10S21G30

3 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 11

Todo El Tiempo: 4,980