Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using a 5-point pentalobe screwdriver, unscrew the 2 pentalobe on the bottom of the phone near the dock connector.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using a #000 Phillips screwdriver, unscrew the 2 very small Phillips screws.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using a plastic opener tool, pry up the battery connector shield. Be careful not to lose the smaller antenna connector shield under the top connector sheild.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pull upwards on the plastic tab. If it's the first time, you may have to use the plastic pry tool on the outside (right) edge of the battery to loosen battery first.
-
Then, out pops the battery.
-
Cancelar: No complete esta guía.
3 personas más completaron esta guía.