Saltar al contenido principal

Qué necesitas

Este desmontaje no es una guía de reparación. Para reparar tu iClicker, utiliza nuestros manuales de servicio .

  1. Disassembling iClicker Device, Disassembling iClicker Device: paso 1, imagen 1 de 1
    • Behold the iclicker in all its interactive and educational beauty.

  2. Disassembling iClicker Device: paso 2, imagen 1 de 1
    • Place the device on a flat surface, buttons facing down.

    • Remove the battery cover and the three batteries within.

  3. Disassembling iClicker Device: paso 3, imagen 1 de 2 Disassembling iClicker Device: paso 3, imagen 2 de 2
    • Remove the two visible screws using a #00 Phillips screwdriver.

    • Oops! Don't forget a hidden third screw beneath the factory label.

    • Peel back the corner of the label to reveal the hidden screw.

    • If you wish to maintain the integrity of the label, a blowdryer may be used to soften the adhesive on the label before removal.

  4. Disassembling iClicker Device: paso 4, imagen 1 de 2 Disassembling iClicker Device: paso 4, imagen 2 de 2
    • Depending on how much abuse your iclicker has endured, you might be able to separate the front and rear panels of the iclicker with your fingers.

    • For the more resistent iclickers, a spudger may be employed to separate the pieces.

  5. Disassembling iClicker Device: paso 5, imagen 1 de 1
    • Your iclicker is now exposed for all its worth.

    • The back panel can be set aisde, as the remaining components are housed in the front panel.

  6. Disassembling iClicker Device: paso 6, imagen 1 de 2 Disassembling iClicker Device: paso 6, imagen 2 de 2
    • Using a spudger, gently pry the battery connectors from the front panel.

  7. Disassembling iClicker Device: paso 7, imagen 1 de 1
    • If your circuit board is stuck in the front panel, use a spudger to lift the circuit board from the front panel.

  8. Disassembling iClicker Device: paso 8, imagen 1 de 1
    • The buttons can be easily removed from the front assembly sans spudger.

  9. Disassembling iClicker Device: paso 9, imagen 1 de 1
    • Don't lose the small LED cover sitting precariously in the front panel.

  10. Disassembling iClicker Device: paso 10, imagen 1 de 1
    • Your iclicker is now disassembled.

Un comentario

What is an iClicker ?

furbies - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 4

Ultimos 30 días: 23

Todo El Tiempo: 7,614