Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Disassembling Yamaha YPG-225 Faceplate

Qué necesitas

  1. Disassembling Yamaha YPG-225 Faceplate, Batteries: paso 1, imagen 1 de 1
    • Turn the keyboard over so that the keys are facing the ground.

  2. Disassembling Yamaha YPG-225 Faceplate: paso 2, imagen 1 de 1
    • Pop the tabs on the battery casing and remove it from the back plate.

  3. Disassembling Yamaha YPG-225 Faceplate: paso 3, imagen 1 de 1
    • Locate the six batteries and remove them from the battery cavity.

  4. Disassembling Yamaha YPG-225 Faceplate, Faceplate: paso 4, imagen 1 de 1
    • Remove the six 10mm screws at the top of the backplate.

  5. Disassembling Yamaha YPG-225 Faceplate: paso 5, imagen 1 de 1
    • Remove the seven 12mm screws in the middle of the back plate.

  6. Disassembling Yamaha YPG-225 Faceplate: paso 6, imagen 1 de 1
    • Remove the eight 10mm screws from the side and the bottom of the back plate.

  7. Disassembling Yamaha YPG-225 Faceplate: paso 7, imagen 1 de 1
    • As the face plate is no longer connected to the body of the keyboard, be careful to not drop the body when performing this step.

    • Flip over the keyboard.

  8. Disassembling Yamaha YPG-225 Faceplate: paso 8, imagen 1 de 2 Disassembling Yamaha YPG-225 Faceplate: paso 8, imagen 2 de 2
    • Lifting from the front and the back of the face plate equally, pull the face plate up and then back, away from the keyboard.

    • Be careful when removing the face plate. There are wires attached.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Cal Poly, Team 2-62, Propen Fall 2012 Miembro de Cal Poly, Team 2-62, Propen Fall 2012

CPSU-PROPEN-F12S2G62

2 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 2

Ultimos 30 días: 8

Todo El Tiempo: 1,650