Introducción

This guide is a prerequisite for replacing other parts of an Xbox 360 E.

Partes

No se requieren partes.

  1. Push the Spudger into the crevice between the grated top panel of the Xbox and the bottom body with the rubber feet.
    • Push the Spudger into the crevice between the grated top panel of the Xbox and the bottom body with the rubber feet.

    • Pull back on the spudger like a lever, keeping it pressed firmly into the crevice.

  2. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  3. Slide the spudger along the separation you have created between the grated panel and the bottom body of the Xbox.
    • Slide the spudger along the separation you have created between the grated panel and the bottom body of the Xbox.

    • Periodically pull back on the spudger like a lever, keeping it pressed firmly into the crevice.

  4. Continue sliding the spudger along the perimeter of the left grated face of the Xbox. Pull the top panel off. Pull the top panel off.
    • Continue sliding the spudger along the perimeter of the left grated face of the Xbox.

    • Pull the top panel off.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Jennifer

Miembro Desde 02/02/14

1,519 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 2-11, Amido Winter 2014 Miembro de Cal Poly, Team 2-11, Amido Winter 2014

CPSU-AMIDO-W14S2G11

4 Miembros

11 Guías creadas

I broke my spudger! May I use anything besides that?

Colin2 Schrek - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 2

Últimos 30 Días: 4

Todo El Tiempo: 1,188