Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip the laptop over so that the Service Tag is shown at the top left corner.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the highlighted screws from the back of the laptop with a Phillips #0 Screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the highlighted screws from the panels in the bottom right-hand corner of the laptop using the Phillips #0 Screwdriver.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two panels in the bottom right-hand corner by sliding in the direction of the arrows imprinted on the panels.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the highlighted screws underneath the removed panels using the Phillips #0 Screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully remove the hard drive from the panel in the bottom right-hand corner of the laptop.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the battery, located on the top side of the laptop to the right of the Service Tag .
-
Remove the battery by pressing inwards on the tabs on either side of the battery.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove cover in the top left side of the laptop next to the battery by pulling it outwards.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the backplate of the laptop by pulling it away from the laptop.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.