Introducción

This guide will teach the user how to remove the back plate, which is necessary to access any of the internal components of the laptop.

Partes

No se requieren partes.

  1. Flip laptop over so that "Service TAG" is shown at the top left corner.
    • Flip laptop over so that "Service TAG" is shown at the top left corner.

  2. Remove highlighted screws from back of laptop.
    • Remove highlighted screws from back of laptop.

  3. Remove screws from panels at bottom right hand side.
    • Remove screws from panels at bottom right hand side.

  4. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda

    ¿Alguna vez arreglaste algo? Eso es genial.

    Comparte tu historia de reparación con #SoyUnGenio

    Todos somos Genios

    Comparte tu historia de reparación con #SoyUnGenio

  5. Remove two panels at bottom right hand corner by sliding in direction of arrows shown
    • Remove two panels at bottom right hand corner by sliding in direction of arrows shown

  6. Remove screws underneath removed panels.
    • Remove screws underneath removed panels.

  7. Remove Hard drive from computer.
    • Remove Hard drive from computer.

  8. Remove battery by pressing inwards on both tabs.
    • Remove battery by pressing inwards on both tabs.

  9. Remove cover at top left of laptop by pulling outwards.
    • Remove cover at top left of laptop by pulling outwards.

  10. Remove backplate of laptop by pulling outward.
    • Remove backplate of laptop by pulling outward.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 283